Engineering, 25.07.2020 08:01 wallacelizzy1
After you check coolant freeze point... a) replace cap immediately after inspecting the cooling system b) call out “Coolant system looks great ,Bay 1” C) inform guest of the results D) both a and c
Answers: 1
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
After you check coolant freeze point... a) replace cap immediately after inspecting the cooling syst...
Mathematics, 20.09.2020 01:01
Mathematics, 20.09.2020 01:01
Biology, 20.09.2020 01:01
Physics, 20.09.2020 01:01
English, 20.09.2020 01:01
History, 20.09.2020 01:01
English, 20.09.2020 01:01
History, 20.09.2020 01:01
Chemistry, 20.09.2020 01:01
Physics, 20.09.2020 01:01
History, 20.09.2020 01:01