Engineering, 24.07.2020 14:01 jaallen3679
Determine the horizontal length of CD that must be laid
out to achieve required true horizontal distance CD.
assume a 100-ft steel tape will be used, with crosssectional area 0.0060 in2, weight 2.0 lb, and standardized
at 68 0F to be 100.014 ft between end marks when
supported through out with a 12-lb pull.
REQUIRED AVERAGE MEANS OF TENSION
HORIZONTAL TEMPRATURE SUPPORT (lb)
DISTANCE CD (ft) (0F)
200.00 68 Throughout 12
378.68 37 Ends only 16
97.00 46 Ends only 18
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Engineering, 04.07.2019 19:10
Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m
Answers: 1
Engineering, 04.07.2019 19:10
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
You know the right answer?
Determine the horizontal length of CD that must be laid
out to achieve required true horizontal dis...
Questions
Physics, 06.10.2019 05:50
Mathematics, 06.10.2019 05:50
Mathematics, 06.10.2019 05:50
History, 06.10.2019 05:50
Biology, 06.10.2019 05:50
Biology, 06.10.2019 05:50
Mathematics, 06.10.2019 05:50
