The boy in the wagon begins throwing bricks out of the wagon to simulate rocket propulsion. The wagon begins at rest, and the boy throws three bricks. The boy’s weight is 80lbs, and the weight of the wago 20 lbs. The bricks weigh 10 lbs each, and he throws them with a horizontal velocity of 10 ft/s relative to the wagon. Neglect horizontal forces on the wagon's wheels. A) What velocity does the boy attain if he throws the bricks one at a time?
B) What velocity does the boy attain if he throws all three bricks at once?
C) Compare the results of parts (a) and (b). What does this suggest about rocket propulsion? Why are these results different?

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?