A particular part is being turned on a lathe. The diameter of the part is supposed to be 20,000 mm. The diameter is measured every 10 minutes and the results are stored in a file called partdiam. dat. Create a data file to simulate this. The file will store the time in minutes and the diameter at each time. Plot the data

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Prove the equivalence between the two statements of the 2nd law of thermodynamics (i.e., a violation of one statement leads to the violatio the other statement)

The proportional limit is always greater than the yield strength for a material. a)-trune b)- false