subject
Engineering, 27.06.2020 21:01 markusblazer

A spherical ball of solid, nonporous naphthalene, a "mothball," is suspended in still air. The naphthalene ball slowly sublimes, releasing the naphthalene vapor into the surrounding air by the molecular diffusion-limited process. Estimate the time required to reduce the diameter from 2.0 to 0.50 cm when the surrounding air is at 347 K and 1.0 atm. Naphthalene has a molecular weight of 128 g/mol, a solid density of 1.145 g/cm3, and diffusivity in the air of 8:19 10␣6 m2=s, and exerts a vapor pressure of 5.0 Torr (666 Pa) at 347 K.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
question
Engineering, 04.07.2019 18:20
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
question
Engineering, 04.07.2019 19:10
In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?
Answers: 3
You know the right answer?
A spherical ball of solid, nonporous naphthalene, a "mothball," is suspended in still air. The napht...
Questions
question
Advanced Placement (AP), 26.02.2020 19:40
question
Health, 26.02.2020 19:40
Questions on the website: 13722367