Engineering, 27.06.2020 20:01 anthonylopez1
Suppose a conventional water bottle cap is made with a single-start thread of 0.125 in pitch. Further suppose that the lid must be rotated 2.75 times to completely close the bottle, requiring the typical use to re-clutch the lid approximately 4 times to screw the lid shut. If the lid is re-designed with exactly the same pitch, but three starts, rather than one, how many times must the lid be rotated to completely close the bottle
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 15:10
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 18:20
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
You know the right answer?
Suppose a conventional water bottle cap is made with a single-start thread of 0.125 in pitch. Furthe...
Questions
Advanced Placement (AP), 17.02.2021 01:30
Mathematics, 17.02.2021 01:30
Mathematics, 17.02.2021 01:30
Mathematics, 17.02.2021 01:30
Mathematics, 17.02.2021 01:30
Mathematics, 17.02.2021 01:30
Computers and Technology, 17.02.2021 01:30
History, 17.02.2021 01:30
Health, 17.02.2021 01:30
Mathematics, 17.02.2021 01:30
