subject
Engineering, 27.06.2020 03:01 edjiejwi

2.9.5: Four Colored Triangles Make sure your triangles: Have sides of different colors (red, green and blue!) Have sides that are 50 pixels long Are centered around the y-axis Have sides drawn with a thickness of 5 pixels Hints: Tracy is drawing 4 triangles, which means that 2 should be left of center and 2 should be right of center. Each triangle has a width of 50. This should help you figure out where to place Tracy to center your triangles! Try to figure out how you can use a for loop to shorten your code!

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
question
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
question
Engineering, 06.07.2019 03:10
Two slings are used to lift a girder of length l and uniform weight per unit length. what is the best position for the slings if the bending moment due to the weight of the girder is to be kept to a minimum?
Answers: 2
question
Engineering, 06.07.2019 04:10
Aheat pump with refrigerant-134a as the working fluid is used to keep a space at 25Ā°c by absorbing heat from geothermal water that enters the evaporator at 500c at a rate of 0.065 kg/s and leaves at 40Ā°c. the refrigerant enters the evaporator at 20Ā°c with a quality of 23 percent and leaves at the inlet pressure as saturated vapor. the refrigerant loses 300 w of heat to the surroundings as it flows through the compressor and the refrigerant leaves the compressor at 1.4 mpa at the same entropy as the inlet. determine: (a) the degrees of subcooling of the refrigerant in the condenser, b)-the mass flow rate of the refrigerant . (c) the heating load and the cop of the pump, and d)-the theoretical minimum power input to the compressor for the same heating load.
Answers: 3
You know the right answer?
2.9.5: Four Colored Triangles Make sure your triangles: Have sides of different colors (red, green a...
Questions
question
Social Studies, 12.04.2021 18:30
question
Mathematics, 12.04.2021 18:30
Questions on the website: 13722363