Engineering, 26.06.2020 23:01 ineedhelpireallydo
Suppose that a steel of eutectoid composition is cooled to 675°C (1250°F) from 760°C (1400°F) in less than 0.5 s and held at this temperature.
Required:
a. How long will it take for the austenite-to-pearlite reaction to go to 50% completion? To 100% completion?
b. Estimate the hardness of the alloy that has completely transformed to pearlite.
Answers: 3
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
Engineering, 04.07.2019 19:10
Agas contained within a piston-cylinder assembly e end nation about same energy states, 1 and 2, where pi 10 bar, v undergoes two processes, a and b, between the sam 0.1 m3, ui-400 kj and p2 1 bar, v2 1.0 m2, u2 200 kj: process a: process from 1 to 2 during which the pressure- volume relation is pv constant process b: constant-volume process from state 1 to a pressure of 2 bar, followed by a linear pressure-volume process to +20 0 state 2 kinetic and potential energy effects can be ignored. for each of the processes a and b, (a) sketch the process on p-v coordinates, (b) evaluate the work, in kj, and (c) evaluate process the heat transfer, in kj
Answers: 2
Suppose that a steel of eutectoid composition is cooled to 675°C (1250°F) from 760°C (1400°F) in les...
Mathematics, 24.10.2019 16:43
Mathematics, 24.10.2019 16:43
English, 24.10.2019 16:43
English, 24.10.2019 16:43
Mathematics, 24.10.2019 16:43
Mathematics, 24.10.2019 16:43
Chemistry, 24.10.2019 16:43
History, 24.10.2019 16:43
Mathematics, 24.10.2019 16:43
Health, 24.10.2019 16:43
Mathematics, 24.10.2019 16:43