Engineering, 26.06.2020 22:01 shartiarahoward
A three-phase load is Y-connected. The load has a phase voltage of 139 V and a phase current of 49 A. Each phase of the load consumes 5.1 kW of power. (A) Sketch and label the load. Find (b) the line voltage, (c) the line current, and (d) the total power consumed in the load? (e) What is the power factor of the load?
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
You know the right answer?
A three-phase load is Y-connected. The load has a phase voltage of 139 V and a phase current of 49 A...
Questions
Chemistry, 03.01.2020 11:31
Mathematics, 03.01.2020 11:31
Advanced Placement (AP), 03.01.2020 11:31
History, 03.01.2020 11:31
Chemistry, 03.01.2020 11:31
Mathematics, 03.01.2020 11:31
Health, 03.01.2020 11:31
