subject
Engineering, 24.06.2020 18:01 henrygrubb554

A horizontal turbine takes in steam with an enthalpy of h = 2.80 MJ/kg at 45 m/s. A steam-water mixture exits the turbine with an enthalpy of h = 1.55 MJ/kg at 20 m/s. If the heat loss to the surroundings from the turbine is 300 J/s, determine the power the fluid supplies to the turbine. The mass flow rate is 0.85 kg/s.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
question
Engineering, 06.07.2019 03:10
Two slings are used to lift a girder of length l and uniform weight per unit length. what is the best position for the slings if the bending moment due to the weight of the girder is to be kept to a minimum?
Answers: 2
question
Engineering, 06.07.2019 03:30
Give three differences between corrosion of metals and the corrosion of ceramics? what is static fatigue?
Answers: 1
You know the right answer?
A horizontal turbine takes in steam with an enthalpy of h = 2.80 MJ/kg at 45 m/s. A steam-water mixt...
Questions
question
Mathematics, 18.03.2021 01:30
Questions on the website: 13722363