subject
Engineering, 24.06.2020 02:01 skatingflower

Draw a fourbar linkage with L1 = 10 cm, L2 = 3 cm L3 = 6 cm and L4 = 6 cm, with LaTeX: \theta_2θ 2= 45o. Consider both configurations in your drawing, namely the open and closed. Measure your transmission angles and indicate which is which. Do you see a difference in values?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
question
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
question
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
question
Engineering, 04.07.2019 18:20
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
You know the right answer?
Draw a fourbar linkage with L1 = 10 cm, L2 = 3 cm L3 = 6 cm and L4 = 6 cm, with LaTeX: \theta_2θ 2=...
Questions
Questions on the website: 13722363