subject
Engineering, 23.06.2020 21:01 Bryson2148

An open container was monitored and found to have a toluene evaporation rate of 0.1 g/min. The ventilation rate is 2.84 m3/min, the temperature is 27°C, and the pressure is 1 atm. Estimate the concentration of toluene vapor in the enclosure and compare it to the TLV of 50 ppm. Perform the calculation for a k of 1.0 and 0.1.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
question
Engineering, 06.07.2019 03:10
Two slings are used to lift a girder of length l and uniform weight per unit length. what is the best position for the slings if the bending moment due to the weight of the girder is to be kept to a minimum?
Answers: 2
question
Engineering, 06.07.2019 03:10
How to convert a friction to decimal ?
Answers: 1
question
Engineering, 06.07.2019 03:20
Areaction-bonded silicon nitride ceramic has a strength of 250 mpa and a fracture toughness of 3.4 mpa(m)^1/2, what is the largest-sized internal flaw that this material can support without fracturing? (use y -1 in the fracture-toughness equation.)
Answers: 3
You know the right answer?
An open container was monitored and found to have a toluene evaporation rate of 0.1 g/min. The venti...
Questions
Questions on the website: 13722363