Engineering, 19.06.2020 13:57 gmc2771

Assume you are conducting a demand modeling study for the morning commuting trips during the peak hour of a typical work day between the city of Niskayuna and the city of Troy. Below is some basic demographics information of the two cities: Assume your study shows that the trip generation for a single household in Niskayuna depends on two factors: household income and the number of workers per household. The formula is estimated as: # of commute trips generated per household = 0.05 + 0.005(household income in thousand dollars) + 0.15 (number of workers in the household). Please estimate the total commute trips generated in the city of Niskayuna during the peak hour of a typical day. Assume your study shows that the trip attraction for the City of Troy depends on only one factor: the total number of establishments. The formula is estimated as: Total # of attracted trips = 65 + 40*(total number of establishments). Please estimate the total number of attracted trips in the city of Troy during the peak hour of a typical day. Use the two linear regression models to determine:
1) The total trip production in City of Niskayuna
2) The total trip attraction in City of Troy
City of Niskayuna City of Troy
# of households 7,397 19963
Total # of workers 10,637 20,304
mean household income ($) 111,728 49,110
# of establishments 136 128

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

Answer

Engineering, 04.07.2019 19:10

The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.

Answers: 2

Answer

You know the right answer?

Assume you are conducting a demand modeling study for the morning commuting trips during the peak ho...

Questions