Engineering, 18.06.2020 18:57 msanger7587

A certain servomechanism system has dynamics dominated by a pair of complex poles and no finite zeros. The time domain specifications on the rise time (tr), percent overshoot (Mp), and settling time (ts) are given by tr <= 0.6 sec, Mp <= 17% ts <= 9.2 sec. (a) Sketch the region in the s-plane where the poles could be placed so that the system will meet all three specifications. (b) Indicate on your sketch the specific locations (denoted by x) that will have the smallest rise time and also meet the settling time specification exactly.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

Answer

You know the right answer?

A certain servomechanism system has dynamics dominated by a pair of complex poles and no finite zero...

Questions