Share Strength A C8 * 18.75 is to be used as tension number. The channel is bolted to a 3/8 inch gusset plate with 7/8 inch diameter, A307 bolts. A tension number is A527 Grade 50 steel and the gusset plate is A36.
A. Check all bolt spacing and edge distance requirements.
B. Calculate the design tensile strength of the tension member. Assume block shear will not govern and the gusset plate has sufficient tensile strength.

Plot schematically the tensile stress versus strain curves for a typical thermoplastic material at a temperature below its glass transition temperature (tg and at a temperature above its tg, respectively. do the same for a typical thermosetting material. list in a table any differences or similarities between the two materials at t> tg and t < tg, respectively, and relate them to the structures of the two types of polymers