Engineering, 07.06.2020 05:00 jmwmarshall
The aluminum rod ABC ( 6 E = × 10.1 10 psi), which consists of two cylindrical portions AB and BC, is to be replaced with a cylindrical steel rod DE ( 6 E = × 29 10 psi) of the same overall length. Determine (1) The deformation of rod ABC. (2) The minimum required diameter d of the steel rod if its vertical deformation is not to exceed the deformation of the aluminum rod under the same load and if the allowable stress in the steel rod is not to exceed 24 ksi.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
Engineering, 04.07.2019 18:20
What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.
Answers: 3
You know the right answer?
The aluminum rod ABC ( 6 E = × 10.1 10 psi), which consists of two cylindrical portions AB and BC, i...
Questions
Mathematics, 16.03.2020 17:00
English, 16.03.2020 17:00
