subject
Engineering, 06.06.2020 22:59 eatheng4441

Relatively speaking, the thickness of Earth’s atmosphere is incredibly small compared to Earth’s radius (REarth = 6.37 · 106 m). Consider that there is no physical boundary between Earth and space, but instead a slow decline in the abundance of air molecules as you move further away from the planet’s surface. (a) Using the information in Table C.5 (Smits), determine an empirical relation between air density and altitude up to 80 km. You may use either Excel or Matlab to import the data. Fit the data with an exponential best f it curve that forces the intercept through the z = 0 value of ?(0) = 1.225 kg m3 . Provide a plot of the data with the fitted equation (accurate to 3 significant figures). Note* this equation is not y(x), but instead ?(z) and the plot should reflect this. (b) Considering the volume of a thin spherical shell, estimate the total mass of Earth’s atmosphere.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
question
Engineering, 06.07.2019 03:10
Steel balls 12 mm in diameter are annealed by heating to 1150 k and then slowly cooled to 400 k in an air att 325 k and h -20 w/m2 k. assume the properties of the steel to be k- 40 w/m k,p 7800 kg/m3, and cp 600 j/kg k. a. determine whether lumped system method can be used to analyze this problem and if so why" b. determine the time required for the cooling process. c. determine the total amount of heat lost from each ball to the ambient air
Answers: 1
You know the right answer?
Relatively speaking, the thickness of Earth’s atmosphere is incredibly small compared to Earth’s rad...
Questions
question
Mathematics, 10.07.2019 10:00
question
Mathematics, 10.07.2019 10:00
question
Mathematics, 10.07.2019 10:00
Questions on the website: 13722362