Engineering, 06.06.2020 16:57 NicoleQuinn
Is = 2A, Vs = 5V, R_1 = 50 Ohm, R_2 = 50 Ohm, R_3 = 100 Ohm, R_4 = 100 Ohm Use MESH ANALYSIS to calculate the current i_1 flowing through resistor R1. Enter only the numerical answer for i_1 in the text box. Only round the final answer and round to three decimal places. Do not include the units (Amps). 0.683 For the same circuit, calculate the current i_3 flowing through resistor R3. Enter only the numerical answer for R_3 in the text box. Only round the final answer and round to three decimal places. Do not include the units (Amps).
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:20
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
Engineering, 04.07.2019 18:20
Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?
Answers: 3
You know the right answer?
Is = 2A, Vs = 5V, R_1 = 50 Ohm, R_2 = 50 Ohm, R_3 = 100 Ohm, R_4 = 100 Ohm Use MESH ANALYSIS to calc...
Questions
Mathematics, 20.12.2020 02:10
Spanish, 20.12.2020 02:20
Mathematics, 20.12.2020 02:20
Mathematics, 20.12.2020 02:20
Business, 20.12.2020 02:20
Mathematics, 20.12.2020 02:20
Social Studies, 20.12.2020 02:20
