Engineering, 06.06.2020 04:02 farrellandnandi

Q1) Design a concrete mixture proportions which will be used for offshore concrete platform. Norway is a world leader on offshore concrete platforms with 1a of the world’s 30 larger offshore concrete structures located on the Norwegian continental shelf. The first of these platforms where the Ekofisk Tank installed in 1974 and the last was Troll gravity based structure installed in 1996. The Sakhalin project is located in a harsh and artic environment where concrete structures have proven excellent characteristics with a minimum of maintenance. 80 mm slump value is required for the Sakhalin project. 28-days concrete characteristic strength is 2b MPa. It is required that no more than 1 test result in 100 will fall below the specified strength. The fine aggregate has a fineness modulus of 2.60 and Zone 3. For Coarse Aggregate (Uncrushed): SSD Bulk Specific Gravity: 2.65, Absorption Capacity: 2.b %, Total Moisture: 1.c % and Dry Rodded Unit Weight: 1345 kg/m3. For Fine Aggregate (Uncrushed): SSD Bulk Specific Gravity: 2.70, Total Moisture: 3.d % and Free Moisture: 2 %. Cement: Portland Composite Cement, Specific Gravity: 2.97. For 0.e5 m3 of concrete, binder amount is calculated as 120 kg (Use ACI Method of Mix Design) Note:(a is 8 b is 6 c is 1 d is 9 e is 9)

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:20

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.

Answers: 3

Answer

You know the right answer?

Q1) Design a concrete mixture proportions which will be used for offshore concrete platform. Norway...

Questions