Engineering, 06.06.2020 01:57 helpmeplease519
A cylindrical rod of copper originally 16.0 mm indiameter is to be cold worked by drawing; the circular cross section will be maintained during deformation. A cold-worked yield strength in excess of 250 MPa and a ductility of at least 12%EL are desired. Furthermore, the final diameter must be 11.3 mm. Explain how this may be accomplished.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
Engineering, 04.07.2019 19:10
What is the main objective of using reheat rankine cycle?
Answers: 3
You know the right answer?
A cylindrical rod of copper originally 16.0 mm indiameter is to be cold worked by drawing; the circu...
Questions
History, 26.06.2019 05:30
Chemistry, 26.06.2019 05:30
Mathematics, 26.06.2019 05:30
Spanish, 26.06.2019 05:30
Mathematics, 26.06.2019 05:30
History, 26.06.2019 05:30
History, 26.06.2019 05:30
Mathematics, 26.06.2019 05:30
History, 26.06.2019 05:30
Chemistry, 26.06.2019 05:30
Biology, 26.06.2019 05:30
History, 26.06.2019 05:30
