Engineering, 02.06.2020 17:59 mikaydeannf1351

Beginning in the late 1940s, many guitar amplifiers incorporated a tremolo circuit that varied the volume3 of the amp over time. Suppose that the input/output relationship of this circuit could be modeled as y(t) = [A sin(Bt) + C]x(t), where x(t) is the input and y(t) is the output. This is a substantial simplification of the behavior of an actual tremolo circuit, but we’ll call it close enough for now. For each part, briefly explain your reasoning.

(a) Specify all combinations of A, B, and C that will cause this system to be time-invariant
(b) Specify all combinations of A, B, and C that will cause this system to be linear

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 16:10

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

Answer

You know the right answer?

Beginning in the late 1940s, many guitar amplifiers incorporated a tremolo circuit that varied the v...

Questions