Engineering, 02.06.2020 15:57 lilquongohard

A circular rod is attached to a wall. It has three gears (1, 2, 3).
Gear 1 is located D inches away from the wall.
Gear 2 is E inches away from Gear A.
Gear 3 is A + B inches away from Gear B.
The torque applied to Gear 1 is A kip-ft, Gear 2 is B kip-ft, Gear 3 is C kip-ft.
If the value of A, B,C is even the torque is positive, if odd the torque is negative.
The outdoor diameter is your largest number in centimeters. The inner diameter is your smallest number in centimeter. Make sure to convert to appropriate units.
The rod is made from Red Brass C83400 from the wall to Gear 1, Structural A-36 Steel from Gear 1 to Gear 2, and Magnesium Alloy Am 1004-T61 from Gear 2 to Gear 3.
a. Draw your diagram with clearly labeled distances, torques, etc.
b. Calculate the maximum shear stress for the three different materials.
c. How many degrees and in which direction does gear three turn in relation to the wall when all three torques are applied?

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.

Answers: 1

Answer

You know the right answer?

A circular rod is attached to a wall. It has three gears (1, 2, 3).
Gear 1 is located D inche...

Questions