Engineering, 29.05.2020 19:03 cwater7

In this lab, you use what you have learned about parallel arrays to complete a partially completed Java program. The program should either print the name and price for a coffee add-in from the Jumpin’ Jive coffee shop or it should print the message: "Sorry, we do not carry that.". Read the problem description carefully before you begin. The data file provided for this lab includes the necessary variable declarations and input statements. You need to write the part of the program that searches for the name of the coffee add-in(s) and either prints the name and price of the add-in or prints the error message if the add-in is not found.

Study the prewritten code to make sure you understand it. Write the code that searches the array for the name of the add-in ordered by the customer.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

Answer

Engineering, 03.07.2019 14:10

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

Answer

Engineering, 04.07.2019 19:10

What are the major differences between injection molding and extrusion?

Answers: 2

Answer

You know the right answer?

In this lab, you use what you have learned about parallel arrays to complete a partially completed J...