Engineering, 28.05.2020 01:06 aliami0306oyaj0n

A 460-V 60-Hz four-pole Y-connected induction motoris rated at 25 hp(note: this is the nominal output power at the nominal speed (or nominal slip).The equivalent circuit parameters areR1= 0.15 R2= 0.154 XM= 20 X1= 0.852 X2= 1.066 PF&W= 400 WPmisc= 150 WPcore= 400 WFor a slip of 0.02, find(Importantnote: this 2% slip mayor may notbe the nominal slip of the motoras it is not explicitly stated. Hence, the output power associated with this slip maybe different than the given nominal output power (i. e. 25 hp)).(a)The line current IL(b)The stator power factor (c)The rotor power factor (d)The rotor frequency (e)The stator copper losses SCLP(f)The air-gap power PAG(g)The power converted from electrical to mechanical form Pconv(h)The induced torque ind(i)The load torque load(j)The overall machine efficiency (k)The motor speed in revolutions per minute and radians per second(l)What is the starting line current of this motor?(Hint: starting slip is one, now redraw your circuit and solve it for the starting current)(m) What is the slip at the pullout torque? What is the pullout torque of this motor?

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

Answer

You know the right answer?

A 460-V 60-Hz four-pole Y-connected induction motoris rated at 25 hp(note: this is the nominal outpu...