Using CodeWarrior, develop and demonstrate the following assembly programs, one at a time. In each case, the numbers (both input and output) are to be stored in RAM and they should be declared within a data section using the assembler directive ds. b or ds. w. To fill in and/or observe values at RAM locations, you should use the data sub-window of the debug window. The input values should be filled in right before running your code. The program converts an 8-bit unsigned binary to a three-ASCII-digit number. For example, a value 0001 0010 in binary should be converted into a 3-digit number as ‘0’ (=$30), ‘1’ (=$31), and ‘8’ (=$38). A value 1111 1111 in binary should be converted into a 3-digit number as ‘2’, ‘5’, and ‘5'.
Note: instead of $30, you should use ‘0’ (including the single quotes) directly in the assembly code.

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?