Engineering, 19.05.2020 22:15 raularriaga

A solid has its circular base on the x-y plane, center at the origin and a radius of 0.5. Its height is determined by

z=cos⁡(x-0.25) sin⁡(y-0.9)+4

Picture the solid as a cylinder but the top of it is not flat, rather it is cut by the function expressed by the equation above

a. Create a mesh plot of the function from x = [-0.5,0.5] and y = [-0.5,0.5]. Note: This will plot the entire square area, not just the cylindrical solid
b. Find the volume of the solid using Monte Carlo Integration. You need to find the average height of the solid on the xy domain. You will then find the volume of a cylinder with a uniform height that has the same volume as the solid. We do not have an analytical solution for this problem so you must validate your solution by demonstrating convergence (include plot).

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

Answer

Engineering, 04.07.2019 18:10

What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

Answer

You know the right answer?

A solid has its circular base on the x-y plane, center at the origin and a radius of 0.5. Its height...

Questions