Engineering, 09.05.2020 03:57 qwerty8364

We want to compare the performance of a switch (L2) versus a router (L3) in terms of the average packet delay. In both, we use the same hardware that consists of a processor that runs at 1 Gbps (2 30 bps). The switch accepts 1 KB (2 10B) fixed size packets. The router accepts variable size packets with an average 1 KB. In both scenarios, packets arrive at a rate λ = 64 packets/s.
(a) What is the service rate (µ), in terms of packets/s, at each port for the switch and the router? 4 pts
(b) What is the traffic intensity (service utilization, rho) at each port for the switch and the router? 4 pts
(c) What is the average queuing delay for the switching port? 4 pts
(d) What is the average queuing delay for the router port? 4 pts
(e) Which one is faster and by how much?

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

Answer

You know the right answer?

We want to compare the performance of a switch (L2) versus a router (L3) in terms of the average pac...

Questions