Engineering, 06.05.2020 20:15 lilfofo9

A plane wall (k=1W/mK) has a thickness of 0.3 m, height of 2 meter, and width of 1 m. It undergoes uniform volumetric heat generation of 1000 W/m3. The left side of the wall is insulated and the right side is cooled via convection with heat transfer coefficient of 5 W/m2K and an air temperature of 25C. a) Find the temperature of the wall at its center and the temperature at the surface in contact with the air. b) If fins (l = 1 W/mK) were added to the rigth hand side, find the temperature of the wall in contact with the air (the base of the fins). The fins are rectangular and span the width of the wall with a thickness of 10 mm and a length of 75 mm. The spacing between fins along the heigth of the wall is 20 mm

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

Answer

Engineering, 04.07.2019 19:10

The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false

Answers: 2

Answer

You know the right answer?

A plane wall (k=1W/mK) has a thickness of 0.3 m, height of 2 meter, and width of 1 m. It undergoes u...

Questions