subject
Engineering, 06.05.2020 05:37 dfrtgyuhijfghj3496

There are two main objectives of the assignment. The first objective is to analyze influence of several parameters on the bearing capacity of square and rectangular foundations. The parameters include shape of the foundation, depth of embedment, foundation size, friction angle and cohesion of soil. The second objective is to suggest on optimum solution, regarding the size, shape and depth of embedment of the foundation below. Program BEARCAP was used in the analysis.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
question
Engineering, 04.07.2019 19:10
Aplate of dimensions 3 m x 3 m is placed 0.37 mm apart from a fixed plate. the plate requires a force of 2n to move at speed of 45 cm/s. evaluate the viscosity of the fluid in between the plates
Answers: 3
question
Engineering, 06.07.2019 03:20
Avertical steel rod of length 2.0 m and diameter 25 mm is rigidly fixed at its upper end and has a flange at its lower, free, end. what will be the maximum stress produced in the rod when a load of 20 kn is applied, (a) gradually to the lower end, (b) suddenly to the lower end, (c) by a collar falling from a height of 50 mm on to the flange?
Answers: 3
question
Engineering, 06.07.2019 03:20
Acountershaft is supported by two tapered roller bearings using indirect mounting. the radial bearing loads are 1120 lb for the left-hand bearing and 2190 lb for the right-hand bearing. the shaft rotates at 400 rpm and is to have an l10 life of 40,000 hours and an application factor of 1.4. assume ka2k 15, and find the required radial rating of each bearing
Answers: 3
You know the right answer?
There are two main objectives of the assignment. The first objective is to analyze influence of seve...
Questions
question
Mathematics, 18.11.2019 08:31
Questions on the website: 13722362