subject
Engineering, 06.05.2020 03:45 mamas4539p79bw7

As a project manager of Very Good Construction you want to plan renting a fleet of 25 cu yd tractor-scrapers and have them hauling between the pit and a road construction job. The haul road is a rutted dirt road that deflects slightly under the load of the scraper. There is a slight grade of 2.5% from the pit to the fill location. Rolling resistance factor is assumed as 100 lbs/ton. The return road is effectively level. The haul distance to the dump location is 0.50 miles and the return distance is 1.50 miles. The scrapers are push loaded in the pit. The cycle time for the pusher is 1.50 minutes and the cycle time for the scrapers is 8 minutes. Assume that the weight on the wheels is 75 tons (full) and 50 tons.1. What are the rolling resistances and grade resistance?
2. What are the effective grades?
3. How many scrapers you recommend to be rented? Explain.
4. What is the production of the system in case 4 scrapers would be rented?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
question
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
You know the right answer?
As a project manager of Very Good Construction you want to plan renting a fleet of 25 cu yd tractor-...
Questions
question
Mathematics, 23.06.2019 09:00
Questions on the website: 13722362