Engineering, 05.05.2020 23:26 natalie857123
1. A cylindrical work bar with 15 mm in diameter and 150 mm length is chucked in an engine lathe and supported at the opposite end using a live center. A 125 mm portion of the length is to be turned to a diameter of 14 mm one pass at a speed of 150 m/min. The metal removal rate should be 125 cm3/min. Determine (a) the required depth of cut, (b) the required feed, and (c) the cutting time.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
Engineering, 04.07.2019 18:20
Wiy doeres rere okhn a pump whon working betwon the same pressure range?
Answers: 2
Engineering, 04.07.2019 19:20
Apure substance is a)-mixture of various chemical elements or compounds b)-substance that has a fixed chemical composition throughout c)-mixture that is homogeneous (such as air) d)-all the answers
Answers: 3
Engineering, 06.07.2019 02:30
Air (c-1.006 kj/kg.k, r-0.287 kj/kg.k) enters a nozzle steadily at 280 kpa and 77°c with a velocity of 50 m/s and exits at 85 kpa and 320 m/s. the heat losses from the nozzle to the surrounding medium at 20°c are estimated to be 3.2 kj/kg. determine (a) the exit temperature and (b) the total entropy change for this process. solve this problem using constant specific heats.
Answers: 1
You know the right answer?
1. A cylindrical work bar with 15 mm in diameter and 150 mm length is chucked in an engine lathe and...
Questions
English, 11.10.2021 20:20
Physics, 11.10.2021 20:20
Biology, 11.10.2021 20:20
Mathematics, 11.10.2021 20:20
English, 11.10.2021 20:20
English, 11.10.2021 20:20
Mathematics, 11.10.2021 20:20
Chemistry, 11.10.2021 20:20
English, 11.10.2021 20:20
Mathematics, 11.10.2021 20:20
Mathematics, 11.10.2021 20:20
English, 11.10.2021 20:20
Mathematics, 11.10.2021 20:20
