Engineering, 05.05.2020 21:29 AdanNava699
15.27 An 18-tooth pinion with a diametral pitch of 6 rotates 1800 rpm and drives a 36-tooth gear at 900 rpm in a gear speed reducer. The pinion and gear with 20 ° full-depth involute teeth are keyed to shafts that are simply supported by bearings. The bearings on each shaft are 2.0 in. from the gear center. If the gears transmit 0.5 hp, what are the forces on the pinion, gear, and shafts?
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
You know the right answer?
15.27 An 18-tooth pinion with a diametral pitch of 6 rotates 1800 rpm and drives a 36-tooth gear at...
Questions
Mathematics, 28.11.2019 16:31
Biology, 28.11.2019 16:31
Mathematics, 28.11.2019 16:31
Mathematics, 28.11.2019 16:31
Mathematics, 28.11.2019 16:31
English, 28.11.2019 16:31
Mathematics, 28.11.2019 16:31
World Languages, 28.11.2019 16:31
Advanced Placement (AP), 28.11.2019 16:31
Biology, 28.11.2019 16:31
English, 28.11.2019 16:31
