subject
Engineering, 05.05.2020 08:55 20heldmadison

It is proposed to deposit a 5 μm thick nickel coating uniformly on all surfaces of a ceramic strip measuring 15 cm x 5 cm x 2 cm by employing a vapor-phase deposition (evaporation-condensation) technique. The vapor pressure-temperature relationship for liquid Ni is of the following form:

ln p (atm) = -(51,590/T) – 2.01 ln T + 32.40.

The normal melting point and boiling point of nickel are 1453°C and 2730°C, respectively, and the density and atomic weights of Ni are 8.91 g. cm^-3 and 58.71 atomic mass units respectively. Calculate the energy in joules needed to evaporate the required quantity of nickel.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
question
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
You know the right answer?
It is proposed to deposit a 5 μm thick nickel coating uniformly on all surfaces of a ceramic strip m...
Questions
question
Mathematics, 12.11.2020 02:40
question
Computers and Technology, 12.11.2020 02:40
question
History, 12.11.2020 02:40
question
Mathematics, 12.11.2020 02:40
question
Physics, 12.11.2020 02:40
Questions on the website: 13722367