subject
Engineering, 05.05.2020 07:47 haileestulley

There are three MUXes in the EX stage. Among them, the 2 MUXes located at the top is meant to provide correct ALU source data 1 and 2, respectively. The forwarding paths can be denoted as MEM-to-EX-1 (data feedback from MEM stage to EX stage for ALU source data 1), MEM-to-EX-2, WB-to-EX-1, and WB-to-EX-2. They are controlled by control signals, ForwardA and ForwardB.1. Is ForwardA 1-, 2- or 3-bit control signal?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
question
Engineering, 04.07.2019 19:10
Which of the following is the most important advantage of a large field of view? a. allows larger areas to be examined b. relieves eyestrain c. minimizes parallax errors. d. increases precision in proportion to the in- crease in field of view
Answers: 2
question
Engineering, 04.07.2019 19:10
Arigid tank contains 10 kg of air at 137 kpa (abs) and 21°c. more air is added to the tank until the pressure and temperature rise to 242 kpa (abs) and 32°c, respectively. determine the amount of air added to the tank. [r-0.287 kj/kg k]
Answers: 3
You know the right answer?
There are three MUXes in the EX stage. Among them, the 2 MUXes located at the top is meant to provid...
Questions
question
Mathematics, 11.10.2019 09:20
Questions on the website: 13722363