Engineering, 05.05.2020 05:37 ariannanykole1
A long, slender structural steel [E = 29,000 ksi] HSS8 x 4 x 1/4 shape (see Appendix B for its cross-sectional properties) is used as a L = 32.00-ft-long column. The column is supported in the x direction at base A and pinned at ends A and C against translation in the y and z directions. Lateral support is provided to the column so that deflection in the x–z plane is restrained at mid-height B; however, the column is free to deflect in the x–y plane at B. Determine the maximum compressive load that the column can support if a factor of safety of 2.37 is required. In your analysis, consider the possibility that buckling could occur about either the strong axis (i. e., the z axis) or the weak axis (i. e., the y axis) of the steel column.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
Engineering, 04.07.2019 19:10
Plan an experiment to measure the surface tension of a liquid similar to water. if necessary, review the ncfmf video surface tension for ideas. which method would be most suitable for use in an undergraduate laboratory? what experimental precision could be expected?
Answers: 2
Engineering, 04.07.2019 19:20
A21-tooth spur pinion mates with a 28-tooth gear. the diametral pitch is 3 teeth/in and the pressure angle is 20°, find the following values: the addendum, dedendum, circular pitch, tooth thickness, and base circle diameters.
Answers: 2
Engineering, 06.07.2019 04:20
Consider the transfer function for a first-order system g(s)=12(s+7)/(s^2+2s+9) for this system determine: a) poles and zeros of the function, b) the natural frequency and damping ratio, c) the peak value achieved in response to a unit step input, d) the peak time for a unit step input, e) the steady-state system response to a unit step input
Answers: 2
You know the right answer?
A long, slender structural steel [E = 29,000 ksi] HSS8 x 4 x 1/4 shape (see Appendix B for its cross...
Questions
Computers and Technology, 16.03.2020 16:53
Mathematics, 16.03.2020 16:54
English, 16.03.2020 16:55
English, 16.03.2020 16:55
