A steel bar AB of diameter D and yield strength Sy supports an axial load P and vertical load F acting in the end of the arm BC. Determine the largest value of F according to the maximum shear stress theory of failure at point A. Given: D = 40 mm, Sy = 250 MPa, P = 10 F Assumption: the effect of the direct shear is negligible and the factor of safety is 2.

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.