Air from a workspace enters the air conditioner unit at 30°C dry bulb and 25°C wet bulb temperatures. The air leaves the air conditioner and returns to the space at 25°C dry bulb and 6.5°C dew point temperature (ϕ2≠100%). If there is any, the condensate leaves the air conditioner at the same temperature of the air leaving the cooling coils (i. e., different from our previous assumption that condensate has same temperature of the cooling coils). The volume flow rate of the air returned to the workspace is 1000 m3 /min (Rair=0.287 kJ/kg∙K). Atmospheric pressure is 101.325 kPa. Compute

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.