Engineering, 05.05.2020 08:38 neariah24
The beam supports the load of P = 9kip. As a result, the A992 steel (E = 29 × 103ksi) member BC is subjected to a compressive load. Due to the forked ends on the member, consider the supports at B and C acts as pins for x-x axis buckling and as fixed supports for y-y axis buckling. Determine the factor of safety with respect to buckling about each of these axes.
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
You know the right answer?
The beam supports the load of P = 9kip. As a result, the A992 steel (E = 29 × 103ksi) member BC is s...
Questions
Mathematics, 05.07.2019 13:00
Social Studies, 05.07.2019 13:00
Mathematics, 05.07.2019 13:00
History, 05.07.2019 13:00
Mathematics, 05.07.2019 13:00
Mathematics, 05.07.2019 13:00
