Engineering, 05.05.2020 09:28 miguelc2145

As a project manager of Permagam Construction you want to plan renting a fleet of 25 cu yd tractor-scrapers and have them hauling between the pit and a road construction job. The haul road is a rutted dirt road that deflects slightly under the load of the scraper. There is a slight grade of 5% from the pit at the fill location. The return road is level. The haul distance to the dump location is 0.90 miles and the return distance is 0.75 miles. The scrapers are push loaded in the pit. The cycle time for the pusher is 1.5 minutes and the cycle time for the scrapers is 8 minutes. Assume that the weight on the wheels is 75 tons (full) and 50 tons

(empty). (Use Tables 14.1 and 14.2)

What are the rolling resistances and grade resistance?

What are the effective grades?

How many scrapers you recommend to be rented? Explain.

What is the production of the system in case 4 scrapers would be rented?

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

Answer

Engineering, 04.07.2019 18:10

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

Answer

Engineering, 04.07.2019 18:20

The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process

Answers: 1

Answer

You know the right answer?

As a project manager of Permagam Construction you want to plan renting a fleet of 25 cu yd tractor-s...

Questions