Engineering, 05.05.2020 16:14 rosezgomez97
Q7. A cylindrical rod of 1040 steel originally 15.2 mm (0.60 in.) in diameter is to be cold worked by drawing; the circular cross section will be maintained during deformation. A cold-worked tensile strength in excess of 840 MPa (122,000 psi) and a ductility of at least 12%EL are desired. Furthermore, the final diameter must be 10 mm (0.40 in.). Explain how this may be accomplished. (10 points)
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
Engineering, 04.07.2019 19:10
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
You know the right answer?
Q7. A cylindrical rod of 1040 steel originally 15.2 mm (0.60 in.) in diameter is to be cold worked b...
Questions
Mathematics, 26.04.2021 23:10
Mathematics, 26.04.2021 23:10
Mathematics, 26.04.2021 23:10
Mathematics, 26.04.2021 23:10
Biology, 26.04.2021 23:10
Mathematics, 26.04.2021 23:10
Mathematics, 26.04.2021 23:10
Mathematics, 26.04.2021 23:10
English, 26.04.2021 23:10
History, 26.04.2021 23:10
Mathematics, 26.04.2021 23:10
