subject
Engineering, 06.05.2020 07:18 roycallender01

Suppose that a machine with a 14-stage pipeline uses branch prediction. 13% of the instructions for a given test program are branches, of which 88% are correctly predicted. Branch instructions the are predicted correctly have a 1 cycle branch delay. The other 12% of the branches suffer a 7-cycle mis-prediction penalty. (In other words, when the branch predictor predicts incorrectly, there are 7 instructions in the pipeline that must be discarded.) Assuming there are no other stalls, develop a formula for the number of cycles it will take to complete n lines of this program.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
You know the right answer?
Suppose that a machine with a 14-stage pipeline uses branch prediction. 13% of the instructions for...
Questions
Questions on the website: 13722362