Engineering, 27.04.2020 03:05 paolacorazza
How much total heat energy input is needed to raise the temperature from 20°C to 100°C for 15-kg steel container filled with 17-kg liquid? [cst = 450 J/kg. Co and cli = 4100 J/kg. Co]
Answers: 2
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
How much total heat energy input is needed to raise the temperature from 20°C to 100°C for 15-kg ste...
Mathematics, 26.05.2020 18:00
Mathematics, 26.05.2020 18:00
Arts, 26.05.2020 18:00
History, 26.05.2020 18:00
Spanish, 26.05.2020 18:00
Social Studies, 26.05.2020 18:00
Health, 26.05.2020 18:00
Mathematics, 26.05.2020 18:00
French, 26.05.2020 18:00
Biology, 26.05.2020 18:00