subject
Engineering, 25.04.2020 12:05 Monte86

A 4-arm bridge network, adjusted to balance conditions, consists of; arm
AB a standard resistor known to be within 0.1% of 100 ohms arm BC a
variable condenser adjusted to 0.362uF in parallel with a variable resistor
adjusted to 2380 ohms. arm CD a standard resistor known to be within 0.1% of
1uohms. arm DA a coil of inductance L and series loss resistance R. Evaluate
L and R, deriving the equations used. Determine the maximum percentage
error that can be tolerated in each of the variable components if L is to be
determined to within 0.5% and R to within 1% of the correct value. If the
variable components are known to be accurate within the limits so
determine how accurately is the ratio L/R known.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 12:10
On a average work day more than work place firs are reorted
Answers: 1
question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
question
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
You know the right answer?
A 4-arm bridge network, adjusted to balance conditions, consists of; arm
AB a standard resistor...
Questions
question
Spanish, 02.07.2019 02:30
Questions on the website: 13722367