An electric discharge machining operation is being performed on tungsten.
(a) Determine the a...
Engineering, 25.04.2020 03:12 jagslovegirl
An electric discharge machining operation is being performed on tungsten.
(a) Determine the amount of metal removed in the operation after one hour at a discharge amperage = 20 amps.
(b) If the work material were tin, determine the amount of material removed in the same time. Use metric units and express the answer in mm^3.
Answers: 1
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 06.07.2019 02:30
On solidification from a melt, the polymer polyethylene forms a semi-crystalline spherulite structure. (i) sketch an individual spherulite and label the amorphous and crystalline regions. (ii) draw a schematic to show the changes in specific volume with temperature during cooling from the melt, comparing it to the theoretical extremes of fully crystalline and fully amorphous (indicate tm and tg)
Answers: 2
Computers and Technology, 23.01.2020 04:31
Chemistry, 23.01.2020 04:31
Computers and Technology, 23.01.2020 04:31
Mathematics, 23.01.2020 04:31
Computers and Technology, 23.01.2020 04:31