A fluid is heated by flowing inside a 60-mm-diameter and 30-m-long circular tube with a flow rate of 0.6 kg/s. The surface temperature of the tube is maintained at 160℃. Evaluating the average fluid properties to be µ = 0.031 kg/m ∙ s, Pr=480, k = 0.125 W/m ∙ K, cp = 2131 /kg ∙ K. If the fluid enters at 25℃, 1) What is the outlet temperature? 2) What is the total heat transfer rate for the tube?

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10