PROBLEM 1 A heat pump is used to heat a room where the outside temperature is -10°C. If the heat pump requires a power input of 2 kW, and the room requires a heat input of 15 kW to maintain the temperature at 25°C, (a) find the COP of the heat pump. (b) Determine if the heat pump is reversible, irreversible, or impossible. (c) If 20 kW of heat input was req

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.