subject
Engineering, 23.04.2020 15:51 fxllsxn

Give a circuit schematic for a 2-stage op amp with differential inputs and a singleended output with a regulated cascoded p-channel input stage with a tail-current bias and with an n-channel common-source second stage and a tail voltage bias. The op amp is to be externally compensated with a dominant pole on the output of the first stage. b) Give an expression for the dc gain of the op amp of part a) in terms of the small

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
question
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
question
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
You know the right answer?
Give a circuit schematic for a 2-stage op amp with differential inputs and a singleended output with...
Questions
question
Mathematics, 16.10.2020 03:01
question
Physics, 16.10.2020 03:01
question
Mathematics, 16.10.2020 03:01
Questions on the website: 13722360