Engineering, 22.04.2020 22:58 lennyatme

The pumping unit is used to recover oil. When the walking beam ABCABC is horizontal, the force acting in the wireline at the well head is FCFC = 250 lb. lb. Determine the torque MM which must be exerted by the motor in order to overcome this load. The horse-head CC weighs 61 lblb and has a center of gravity at GCGC. The walking beam ABCABC has a weight of 130 lblb and a center of gravity at GBGB, and the counterweight has a weight of 225 lblb and a center of gravity at GWGW. The pitman, ADAD, is pin connected at its ends and has negligible weight.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Prove the equivalence between the two statements of the 2nd law of thermodynamics (i.e., a violation of one statement leads to the violatio the other statement)

Answers: 2

Answer

Engineering, 04.07.2019 19:10

The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.

Answers: 2

Answer

You know the right answer?

The pumping unit is used to recover oil. When the walking beam ABCABC is horizontal, the force actin...

Questions