Engineering, 21.04.2020 17:58 amflet19

A traverse starts at a known point A [E(X)=4321.404, N(Y)= 6240.562] and closes on control point D [E(X)=2009.064; N(Y)= 5652.213]. The intermediate traverse points are P, Q, and R. A fixed bearing from A to point P is given as BZAP = S33o 02’W. Observations at station P (taking back sight on A) is angle to right α = 235° 12' 30"; the angle to the right at station Q (taking back sight to station P) is β=133° 23' 19"; and angle to the right at station R (taking back sight on station Q) is ɣ= 291° 16' 45". The horizontal distances measured are as follows: DAP = 451.72 ft, DPQ =515.72 ft, DQR = 9792.83 ft, and DRB =932.81 ft. Adjust the traverse and select the correct responses from the pull down menu

a. provisional x-coordinate for point Q is
b. Azimuth Q to R (AZQR) in DD. MMSS =
c. erse precision as a representative fraction (e. g., 1: )
d. raverse misclosure (dx, dy) is
e. provisional y-coordinate for point Q is

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

Answer

Engineering, 04.07.2019 18:10

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

You know the right answer?

A traverse starts at a known point A [E(X)=4321.404, N(Y)= 6240.562] and closes on control point D [...

Questions