Engineering, 21.04.2020 16:51 Justadumbemo
Consider a Mach 3 flow at 1 atm pressure initially moving over a flat horizontal surface. The flow then encounters a 20 degree expansion corner, followed by a 20 degree compression corner that turns the flow back to the horizontal. Calculate the pressure of the flow downstream of the compression corner. Note: You will find that the pressure downstream of the compression corner is different from the pressure upstream of the expansion corner, even though the upstream and downstream flows are in the same direction, namely horizontal. Why
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
Engineering, 04.07.2019 19:10
The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]
Answers: 3
You know the right answer?
Consider a Mach 3 flow at 1 atm pressure initially moving over a flat horizontal surface. The flow t...
Questions
Computers and Technology, 02.12.2019 20:31
Mathematics, 02.12.2019 20:31
Biology, 02.12.2019 20:31
Mathematics, 02.12.2019 20:31
Chemistry, 02.12.2019 20:31
Biology, 02.12.2019 20:31
Computers and Technology, 02.12.2019 20:31
Advanced Placement (AP), 02.12.2019 20:31
